Forums › Mitsubishi Forums › Lancer › Lancer 08+ › Lancer 08+ Engine / Turbo / Drivetrain › 2008-2015 Turbo Guide For Manual/CVT › Reply To: 2008-2015 Turbo Guide For Manual/CVT
it is worth to mention that if you replace your intake for evo X/RA intake manifold you MUST get the right bolts for it, being stock base lancer 10mm and evo X/RA 12MM. there’s no gains from swapping it as the air intake bore is the same diameter as the plastic one (but in this case, you can bore it bigger)
ALSO, the stock Lancer fuel rail wont bolt onto the new intake manifold because bracket wont line up with bolt threads/holes on the intake, you have to either make a new bracket to adapt/sit the lancer fuel rail or use the evo X/RA fuel rail, and for that you must block off/remove/replace/not use the fuel pressure regulator because it has a vacuum line and fuel return line that would throw off the car’s fuel pressure.