Hello everyone we have been testing to see if we could do a flex fuel kit on a turbo lancer with stock Evo X injectors. Well good news WE DID IT! This is not super detailed but you get the gist of it. 😉 Also, we sale the kits HERE and if you are local to Long Beach CA or Jacksonville FL we can install the kit for you, don’t forget you need a tune too.
Here is the turbo lancer we installed the FF kit on


This is the spot we chose to put the Ethanol Gauge

Accessing the fuel tank to add the fuel line and sensor


It was a bitch and tight fit but we got it to work

All fits good and ran the wires to the front for the gauge

What ya’ll know about wire hiding



Alright time to take out the center cubby thingy…



We even fixed his cig lighter, it came unpulled from the back a long time ago. We got it apart so why not. LOL

Now lets install the gauge



Not TOO bad of a hole, trying to keep things clean and tidy


Gauge holder mounted with a ever so slight angle to it, per customer request

See the angle now

Fully mounted


BAM DONE!




Load the Flex Fuel tune and FIRED right up! 9.9 Ethanol in 93 pump gas LOL

Now lets go get some E85



Lola is sexy right


-
This topic was modified 6 years, 11 months ago by
Rallinspired.
-
This topic was modified 6 years, 11 months ago by
Rallinspired.
-
This topic was modified 6 years, 11 months ago by
Rallinspired.
-
This topic was modified 6 years, 11 months ago by
Rallinspired.
-
This topic was modified 6 years, 11 months ago by
Rallinspired.