[Juan Josue Morales Rosario]

Pictures have been uploaded, can you see them.

What else would you need a picture?

[Juan Josue Morales Rosario]

I don’t think it’s tranny dependant, but I have a manual.

The only pictures I have on my phone are comparing the size.

BTW, it is bigger than the intake.

• This reply was modified 5 years, 11 months ago by Juan Josue Morales Rosario.

Attachments:

You must be logged in to view attached files.

[Juan Josue Morales Rosario]

In my NA 4B12 I used a 6G75 MIVEC throttle. It is not a direct swap. You will have to eliminate the coolant passes. I just cut off the entire part with an angle grinder.

Also you have to use the plastic part (sorry I don’t know how it’s called in English) from the OEM throttle. To fit it requires a few modifications.

The four screws are bigger in the throttle, I used the Lancer OEM screws. This was two years ago, to this point, zero issues.

[Author]

Posts